TFW2005HisstankTokuNationToyark
Tokunation › Kamen Rider › Page 51

under Kamen Rider

The first handful of Kamen Rider Zero-One toys have been listed today on Bandai’s b-boys website, giving us our first look at their official images and pricing/release info for a trio of upcoming products. While this isn’t even a fraction of what we can expect from the show, these 3 initial listings give us a lot to be excited for as well!

DX Hiden Zero-One Driver 
Releases August 31st for 6980 yen. The Driver will include the Rising hopper Progrise Key and as a first run bonus through many retailers, a Zero-One Ridewatch will be included for use with the DX Ziku Driver.

Rider Kicks Figure RKF Kamen Rider Zero-One Rising Hopper
This basic figure doesn’t appear to included any weapons, only a pair of extra hands. Releasing in late August, RKF Zero-One retails for 2500 yen.

Rider Hero Series 01 Kamen Rider Zero-One Rising Hopper Vinyl
Continuing the long tradtion of Rider Hero vinyls, the first to be revealed for Zero-One is the hero himself! Releasing in early August this vinyl retails for 900 yen.

Let us know what you plan to add to your collection in the thread linked below! And don’t forget, Kamen Rider Zero-One officially premieres September 1st!

under Kamen Rider

Earlier in the week, we had our first look at Kamen Rider Zero-One, ushering in the age of the Reiwa Era we now have our first look at the show proper thanks to a press conference that was held in Japan. This press conference gives us our first look at the actual stunt suit for Zero-One himself, as well as revealing the show’s ensemble and the show’s story:

AI and robots replace the need for human workers in a lot of labor-related jobs. The civilian identity of the Zero One is Hiden Aruto, he’s the president of Hiden Intelligence. There’s a group called A.I.M.S. which is an anti-AI group and fights the bad robots while a group of hackers serves as the main antagonists for this show. Kamen Rider Valkyire’s civilian identity’s been confirmed as female as many have speculated when the scans were first released and it seems like she’ll be part of the show’s main cast early on in the series’ run. 

Voice actors Koichi Yamadera will be the show’s narrator, while Noriko Hidaka will be providing the voice for the A.I system. The press conference can be viewed in full in the box down below: 

 

under Kamen Rider

AM-A-ZOOON!

Just in case you missed it, P-Bandai teased the release of a Complete Selection Modification Amazons Driver sometime ago. The Pre-Order page for that item’s finally launched and with that, we now have new photographs of this wonderful piece along with pricing and release info.

The package will include:

  • Three changeable faceplates, one for Amazons Omega, Alpha, and Sigma.
  • A replica of the Amazons Register and the sickle weapon used by Omega.
  • Pre-recorded lines from the actors of all three aforementioned Riders, in addition to a gimmick that will let it play select music from the show’s soundtrack.

Pre-Orders won’t begin until September 2nd, 2019 and the belt won’t ship until December of the same year. All of this can be yours for 27,500 yen before middleman fees and international shipping wherever applicable.

In the meantime, be sure to check out the two promotional videos down below:

 

under Kamen Rider

Rejoice!

The rumors were true, and a surprise guest will be making a splash onto next week’s episode of Kamen Rider Zi-O: and it’s none other than the first future Rider himself: Kamen Rider Aqua!

Michael Minato or Kamen Rider Aqua made his first debut in the Kamen Rider X Kamen Rider Fourze & OOO Movie War Mega Max film. He is a young hero from the year 2050. However, he becomes possessed by a Greed called Posiden and becomes the villainous Kamen Rider Posiden. 

Screenshots of the episode can be viewed on Toei’s official Kamen Rider web page, but as there might be potential spoilers do click on at your own risk!

under Kamen Rider

Bandai Japan has released the first official images for the next entry in the SH Figuarts series!

This time the Resistance warrior Kamen Rider Geiz gets a new entry- his Super form, Geiz Revive will be recreated in a remarkable offering- fully adjustable armor!

A special pack known as the True Savior Set will offer all parts necessary to recreate both of Geiz Revive’s configurations- Goretsu & Shippu.

SH Figuarts Geiz Revive True Savior will be a Tamashii Web Exclusive but price & release details have not been confirmed at time of writing. Stay tuned to TokuNation for all SH Figuarts Kamen Rider reveals!

under Kamen Rider

Following the exciting initial reveal we now have some full catalog scans for the first Kamen Rider of the Reiwa Era– Kamen Rider Zero-One!

Here is everything we know about this new Kamen Rider thus far:

*The main gimmick for this series involves memory-card based devices known as Progrise Keys which are inserted into Drivers and weapons to unlock new abilities. Thus far all Progrise Keys seem to be based on animals.

*Kamen Rider Zero-One will henshin using the Rising Hopper Progrise Key in his unique Driver- tentatively known as the Hiden Zero-One Driver. Additional forms to be used by Zero-One include Flying Falcon, Biting Shark, Flaming Tiger, Freezing Bear and a massive armored drone form called Breaking Mammoth.

*Zero-One’s motorcycle converts into his phone- a device called the RisePhone. Additional Progrise Keys will be carried in Zero-One’s belt attachment, the Progrise Key Connector.

Once again we will have MULTIPLE Kamen Riders in this series!

*Kamen Rider Vulcan is armed with a new gun-based Driver- the AIMS Shot Riser. Vulcan’s signature Progrise Key is Shooting Wolf and he has access to a separate form called Punching Kong.

*Kamen Rider Valkyrie also uses the AIMS Shot Riser and has two unique Progrise Keys- Rushing Cheetah & Lightning Hornet.

*Kamen Rider Horobi uses the Sting Scorpion Progrise Key and has a unique Driver- the Force Riser.

Each Rider has a signature weapon based on an attache case: Zero-One uses the sword-like Attache Calibur, Vulcan uses the Attache Shotgun and Horobi uses the Attache Arrow. Another weapon called the Authorise Buster is also detailed- this is an axe that can transform into a gun and may be available to multiple Riders.

Finally, we have some quick teasers for the first Rider Upgrades! Using a new model of Progrisse Keys, Zero-One will unlock the Shining Hopper form while Vulcan activates Assault Wolf.

So far Kamen Rider Zero-One is shaping up to be a very interesting series! Stay tuned to TokuNation for all Kamen Rider Zero-One reveals!

under Kamen Rider

Rejoice, for a new Era of Kamen Rider is at hand!

After months of teasing and speculation we at last have our first look at the very first Rider of the Reiwa Era: Kamen Rider Zero-One! This new Rider’s base form is a yellow and black armor design, known as Rising Hopper.

Zero-One’s abilities are linked to miniature devices known as Progrize Keys. By changing Keys in the belt Zero-One can activate new forms and weapons.

Additional forms for Kamen Rider Zero-One include:


*Flying Falcon
*Biting Shark
*Flaming Tiger
*Freezing Bear

With many more to be revealed!

TWO other Kamen Riders are mentioned in these early scans- Kamen Rider Vulcan & Kamen Rider Valkyrie! Each Rider will have their own Progrize Keys for alternative combat skills. Vulcan’s initial form is Shooting Wolf while Valkyrie’s is Lightning Hornet.

Stay tuned to TokuNation as we keep you up to date on this remarkable new Kamen Rider series!

under Kamen Rider

Bandai Japan has opened a teaser page for the next entry in the Complete Selection Modification collector series.

The next CSM entry will be the Amazons Driver from Kamen Rider Amazons! This special web series aired in 2016 and served as a revamp of sorts to the 1974 release Kamen Rider Amazon.

Sadly, no price or release details for the Amazons Driver have been confirmed at time of writing. However, the page lists July 16 2019 as an announcement date, so stay tuned to TokuNation for further details!

under Kamen Rider

Bandai’s Candy Toy Blog has just fully revealed two new upcoming waves of Shodo-X! Consisting of releases from Kamen Rider Agito as well as Kamen Rider Black & Black RX, we get a huge variety for forms and a few Rider Machines:

Kamen Rider Agito
– Agito Ground Form
– Agito Trinity Form
– Agito ShiningForm
– Machine Tornador (A parts)
– Machine Tornador (B Parts)
– Extension set (Weapons & parts to make Flame/Storm forms)

So you get nearly every Agito form aside from Burning as well as his Rider Machine in this wave! Of note however is that you will need duplicates of Ground & Trinity Form in order to have stand-alone Flame & Storm Forms at the same time. So expect to see cases broken down to sell extras when this wave releases.

Black & RX
– Black
– Black RX
– Battle Hopper
– Acrobatter
– Shadow Moon

Comparisons are shown between these new Shodo-X releases and the original Shodo VS releases for Black & company, illustrating the improvements of the X line. So if you picked up the older VS releases, it looks like a fairly significant upgrade this go around.

under Kamen Rider

L-I-O-N! LION!

Just in case you missed it our friends at Tamashii Nations recently revealed that an S.H.Figuarts Shinkocchou Seihou Kamen Rider Beast was in the works, to compliment this release a separate set containing his Beast Mantles was also teased, and P-Bandai finally opened the pre-order page for that set and with that, we now have pricing, release info, and some new pictures to go along with it.

Pre-Orders for the Beast Mantle set will begin June 28 2019 and will ship out in November later in the year. Suggested retail price is 4,400 yen before shipping and handling fees wherever applicable.